The Port of Melbourne is the busiest container port in Australia, and it also handles car carriers, bulk liquids, general cargo and cruise ships. Many ships berth along the Yarra and Maribyrnong rivers, where passing traffic and river current put extra load on mooring lines. Nautix Marine carries out mooring winch brake rendering tests in Melbourne and Geelong with a calibrated hydraulic jack kit, and issues a certificate for each brake tested. Our team flies in from Perth with the full test kit, and we plan each visit with your agent.
River berths see constant ship movements. When a large ship passes close by, the moored ship surges and its lines take sudden loads. Strong northerly winds in summer and cold fronts in winter add to this. Container ships and car carriers have high windage, so a gust can load the brakes quickly. If a brake renders too early, the ship can move along the berth and stop cargo work. If it holds too long, a line can part. Testing confirms each brake renders at the load in your Mooring System Management Plan.
Please send us the ETA, berth, port stay and the winch maker’s data as early as you can. Container ship port stays in Melbourne are often short, so we plan the work around cargo operations and test one winch at a time while the others stay in use. On board, we fit the test arm, pump the jack in stages and record the pressure at which the drum starts to turn. If a brake is outside the target range, we adjust and mark the spindle, then test again.
In most cases, yes. We work winch by winch with the ship’s crew so that lines stay tended and cargo work continues.
The render load of each brake against the line SDMBL, the method used, calibration details for the jack and gauge, and a competent person’s signature. It is suitable for PSC, vetting and class reviews.
We also test brakes in Adelaide, Sydney and Fremantle.
Book a brake rendering test in Melbourne: request a quote or call +61 8 6144 4716.
Need Help? Talk to Nautix Marine