Brake testing for grain and woodchip ships in King George Sound
Mooring winch brake rendering test Albany: Nautix Marine tests the brakes on grain, woodchip and silica sand ships in Albany, Western Australia. We can mobilise from 2 hours after your request. Albany is about five hours by road from our Perth base, so send the ETA early. We test each brake with a calibrated hydraulic jack kit. Nautix Marine signs and issues a certificate for the brakes tested.
A brake rendering test is also called a winch brake render test or a brake holding test.
Mooring winch brakes should be set to render at about 60% of the ship design minimum breaking load (SDMBL). That way the brake slips before the mooring line or the deck fittings fail. We use a hydraulic jack on the drum and record the pressure where the brake slips. We convert that to a render load. If the brake is outside the target, we adjust it, mark it and test again. RightShip’s render testing guide explains the method in more detail.
The Port of Albany sits in Princess Royal Harbour, off King George Sound on the south coast of WA. It exports grain, woodchips and silica sand. Its busiest time is the grain harvest, from about November to March, when bulk carriers queue in the Sound. Albany is exposed to Southern Ocean weather. Cold fronts bring strong westerly and south-westerly winds, often with little warning, and these push ships hard against their lines. If a brake renders too early, the ship can move off the berth during loading. If it holds too long, a line can part instead. Grain dust and woodchip fibre also build up around the brake band.
Send us the ship name, ETA, berth, number of winches and the winch maker’s data. In harvest season we can often plan around the grain queue so the test is done while the ship waits. We complete up to two tests a day, with up to 10 winches in each test. On board we fit the test arm, pump the jack in stages and record the render point. Any brake outside the target is adjusted, marked and tested again.
Nautix Marine signs and issues the certificate. For each mooring winch brake rendering test Albany job, it records the winch tested, the jack pressure applied and the render force reached against SDMBL. We email it to the ship and your office after the test.
We can mobilise from 2 hours after your request. Albany is about five hours by road from Perth, so please allow for travel time and send the ETA as early as you can.
We complete up to two tests a day, with up to 10 winches in each test.
Yes, if weather allows and your agent can arrange a launch. Testing at anchor in King George Sound saves time at the berth.
We can renew linings and test again once they have bedded in. See our mooring winch inspection and repair services.
Ship name, ETA, berth or anchorage, number of winches, the winch maker and model, and the SDMBL if you hold it.
We also test brakes in Bunbury, Fremantle and Kwinana. See brake rendering tests at all ports.
Book a mooring winch brake rendering test Albany: request a quote or call +61 8 6144 4716.
Other Service
GET AN ALBANY BRAKE TEST QUOTE
Need Help? Talk to Nautix Marine