Brake testing for bulk carriers and tankers at Kwinana
Mooring winch brake rendering test Kwinana: Nautix Marine tests the brakes on bulk carriers, tankers and gas carriers at Kwinana, Western Australia. We can mobilise from 2 hours after your request. Kwinana is less than an hour by road from our Perth base. We test each brake with a calibrated hydraulic jack kit. Nautix Marine signs and issues a certificate for the brakes tested.
A brake rendering test is also called a winch brake render test or a brake holding test.
Mooring winch brakes should be set to render at about 60% of the ship design minimum breaking load (SDMBL). That way the brake slips before the mooring line or the deck fittings fail. We use a hydraulic jack on the drum and record the pressure where the brake slips. We convert that to a render load. If the brake is outside the target, we adjust it, mark it and test again. RightShip’s render testing guide explains the method in more detail.
Kwinana handles dry bulk and liquid cargoes. Dust from dry bulk settles on the winch decks. Ships carrying liquid cargo can have oil or chemical residue near the brakes. Both can contaminate or glaze the linings, and that moves the render point away from the set value. The Kwinana berths sit on Cockburn Sound, which is open to the westerly sea breeze and to winter weather. A brake that renders too early lets the ship move along the berth. A brake that holds too long can part a line.
Send us the ship name, ETA, berth, number of winches and the winch maker’s data. Kwinana is close to our base, so we can often attend the same day. We complete up to two tests a day, with up to 10 winches in each test. On board we fit the test arm, pump the jack in stages and record the render point. Any brake outside the target is adjusted, marked and tested again.
Nautix Marine signs and issues the certificate. For each mooring winch brake rendering test Kwinana job, it records the winch tested, the jack pressure applied and the render force reached against SDMBL. We email it to the ship and your office after the test.
We can mobilise from 2 hours after your request. Kwinana is less than an hour by road from our Perth base.
We complete up to two tests a day, with up to 10 winches in each test.
Yes, if weather allows and your agent can arrange a launch.
Yes. We can clean drums, renew linings and test again once they have bedded in. See our mooring winch inspection and repair services.
Ship name, ETA, berth or anchorage, number of winches, the winch maker and model, and the SDMBL if you hold it.
We also test brakes in Bunbury, Fremantle and Albany. See brake rendering tests at all ports. We also offer marine load testing in Western Australia.
Book a mooring winch brake rendering test Kwinana: request a quote or call +61 8 6144 4716.
Other Service
GET A KWINANA BRAKE TEST QUOTE
Need Help? Talk to Nautix Marine