Brake testing for bulk carriers and tankers in Bunbury
Also in: 中文 | Tiếng Việt | Deutsch | Bahasa Melayu | Русский | 日本語
Mooring winch brake rendering test Bunbury: Nautix Marine tests the brakes on bulk carriers, tankers and woodchip ships in Bunbury, Western Australia. We can mobilise from 2 hours after your request. Bunbury is about two hours by road from our Perth base. We test each brake with a calibrated hydraulic jack kit. Nautix Marine signs and issues a certificate for the brakes tested.
A brake rendering test is also called a winch brake render test or a brake holding test.
Mooring winch brakes should be set to render at about 60% of the ship design minimum breaking load (SDMBL). That way the brake slips before the mooring line or the deck fittings fail. We use a hydraulic jack on the drum and record the pressure where the brake slips. We convert that to a render load. If the brake is outside the target, we adjust it, mark it and test again. RightShip’s render testing guide explains the method in more detail.
Bunbury is the main port of the South West. It ships alumina, mineral sands, woodchips and spodumene, and it receives caustic soda. Abrasive dust from these cargoes settles on the winch decks. It can glaze brake linings or score drums, and that moves the render point away from the set value. Strong southerly weather in winter also loads the mooring lines at the inner harbour berths. A brake that renders too early lets the ship move off the berth. A brake that holds too long can part a line.
Send us the ship name, ETA, berth, number of winches and the winch maker’s data. We travel from Perth with the jack kit and fit a test arm to each drum. We pump the jack in stages and record the render point. We complete up to two tests a day, with up to 10 winches in each test. Any brake outside the target is adjusted, marked and tested again.
Nautix Marine signs and issues the certificate. For each mooring winch brake rendering test Bunbury job, it records the winch tested, the jack pressure applied and the render force reached against SDMBL. We email it to the ship and your office after the test.
We can mobilise from 2 hours after your request. Bunbury is about two hours by road from Perth.
We complete up to two tests a day, with up to 10 winches in each test.
Yes. We can clean drums, renew linings and test again once they have bedded in. See our mooring winch inspection and repair services.
Yes. We can also load test davits, cranes and gangways, and inspect lifesaving and firefighting equipment.
Yes, if weather allows and your agent can arrange a launch.
Ship name, ETA, berth or anchorage, number of winches, the winch maker and model, and the SDMBL if you hold it.
At least once a year, and after any of the changes listed above.
We also test brakes in Fremantle, Kwinana and Albany. See brake rendering tests at all ports.
Book a mooring winch brake rendering test Bunbury: request a quote or call +61 8 6144 4716.
Other Service
GET A BUNBURY BRAKE TEST QUOTE
Need Help? Talk to Nautix Marine