Skip to main content

Nautix Marine

Mooring Winch Brake Rendering Test in Brisbane, QLD

Brake testing for ships at the Port of Brisbane

mooring winch brake rendering test Brisbane

Mooring winch brake rendering test Brisbane

Mooring winch brake rendering test Brisbane: Nautix Marine tests the brakes on container ships, car carriers, bulk carriers and tankers at the Port of Brisbane and Fisherman Islands in Queensland. We test each brake with a calibrated hydraulic jack kit. Nautix Marine signs and issues a certificate for the brakes tested. Send us your ETA and berth, and we will confirm attendance time for your visit.

A brake rendering test is also called a winch brake render test or a brake holding test.

What a mooring winch brake rendering test Brisbane ships need checks

Mooring winch brakes should be set to render at about 60% of the ship design minimum breaking load (SDMBL). That way the brake slips before the mooring line or the deck fittings fail. We use a hydraulic jack on the drum and record the pressure where the brake slips. We convert that to a render load. If the brake is outside the target, we adjust it, mark it and test again. RightShip’s render testing guide explains the method in more detail.

Why brakes matter in Brisbane

The Port of Brisbane handles containers, vehicles, dry bulk and liquid cargoes. Ships here often work to tight berth windows, so a brake that fails a test can delay sailing. Summer storms and strong south-easterly winds put heavy loads on mooring lines at the river and bay berths. A brake that renders too early lets the ship move off the berth during cargo work. A brake that holds too long can part a line instead. Salt, dust and cargo residue also build up around the brake band and drum, and that moves the render point away from the set value.

Where we work in Brisbane

  • Container berths at Fisherman Islands
  • Vehicle and general cargo berths
  • Dry bulk and liquid cargo berths
  • Ships at anchor in Moreton Bay, by arrangement with your agent

When a retest is due

  • At least once a year
  • After new brake linings, or after the drums are skimmed or re-surfaced
  • After fitting mooring lines of a different diameter
  • After a brake renders early or there is a mooring incident
  • When a flag state, class society or charterer asks for fresh test records

How a Brisbane brake rendering test runs

Send us the ship name, ETA, berth, number of winches and the winch maker’s data. We confirm the attendance time and the people and kit we will bring. On board we fit a test arm to each drum, pump the jack in stages and record the render point. We complete up to two tests a day, with up to 10 winches in each test. Any brake outside the target is adjusted, marked and tested again. Our crew work around cargo operations so the ship keeps its sailing time.

Certificates and records

Nautix Marine signs and issues the certificate. For each mooring winch brake rendering test Brisbane job, it records the winch tested, the jack pressure applied and the render force reached against SDMBL. We email it to the ship and your office after the test. The master and your superintendent can then file it with the ship’s mooring records.

Brisbane brake test FAQs

How fast can you attend in Brisbane?

Send us your ETA and berth as early as you can. We confirm the attendance time for each visit when we quote.

How many winches can you test in a day?

We complete up to two tests a day, with up to 10 winches in each test.

Can you clean or reline worn brakes?

Yes. We can clean drums, renew linings and test again once they have bedded in. See our mooring winch inspection and repair services.

Can you do other work on the same visit?

Yes. We can also load test davits, cranes and gangways, and inspect lifesaving and firefighting equipment.

Can you test while the ship is at anchor?

Yes, if weather allows and your agent can arrange a launch.

What do you need to quote a Brisbane brake test?

Ship name, ETA, berth or anchorage, number of winches, the winch maker and model, and the SDMBL if you hold it.

How often must brakes be tested?

At least once a year, and after any of the changes listed above.

Other ports

We also test brakes in Fremantle, Bunbury, Kwinana and Albany. See brake rendering tests at all ports.

Book a mooring winch brake rendering test Brisbane: request a quote or call +61 8 6144 4716.

Brake rendering test fremantle
Mooring winch brake and drum servicing
Mooring winch inspection on a ship deck